|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VBE 100-12NO7 Single Phase Rectifier Bridge with Fast Recovery Epitaxial Diodes (FRED) in ECO-PAC 2 Preliminary data sheet VRSM V 1200 VRRM V 1200 VBE 100-12NO7 EG 1 IdAV = 100 A VRRM = 1200 V trr = 40 ns Typ PS16 ~L 9 ~ K10 Pin arangement see outlines B3 Symbol IdAV IdAVM IFSM Conditions TC = 70C, module TVJ = 45C VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine Maximum Ratings 100 100 500 525 415 440 1250 1160 860 820 -40...+150 150 -40...+125 A A A A A A A2 s A2 s A2s A2 s C C C V~ V~ Features * Package with DCB ceramic base plate in low profile * Isolation voltage 3000 V~ * Planar passivated chips * Low forward voltage drop * Leads suitable for PC board soldering Applications * Supplies for DC power equipment * Input and output rectifiers for high frequency * Battery DC power supplies * Field supply for DC motors Advantages * Space and weight savings * Improved temperature and power cycling capability * Small and light weight * Low noise switching Dimensions in mm (1 mm = 0.0394") I2t TVJ = 45C VR = 0 TVJ = TVJM VR = 0 TVJ TVJM Tstg VISOL Md Weight Symbol IR VF VT0 rT RthJC RthCH IRM trr a dS dA 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s 3000 3600 Mounting torque (M4) typ. Conditions VR = VRRM VR = VRRM IF = 60 A TVJ = 25C TVJ = TVJM TVJ = 25C 1.5-2/14-18 Nm/lb.in. 24 g Characteristic Values typ. max. 1 2.5 2.7 mA mA V for power-loss calculations only per diode; DC current per diode, DC current, typ. IF = 130 A, -diF/dt = 100 A/s VR = 100 V, TVJ = 100C IF = 1 A; -di/dt = 300 A/s; VR = 30 V, TVJ = 25C Max. allowable acceleration creeping distance on surface creepage distance in air 7 40 1.07 V 8.2 m 0.8 K/W 0.2 K/W 1.5 A ns m/s2 mm mm 241 50 11.2 9.7 Data according to IEC 60747 refer to a single diode unless otherwise stated for resistive load at bridge output. IXYS reserves the right to change limits, test conditions and dimensions. (c) 2002 IXYS All rights reserved 1-2 VBE 100-12NO7 100 A 80 IF 60 TVJ = 150C TVJ = 100C TVJ = 25C 10 C Qr 8 TVJ = 100C VR = 600 V 100 A 80 IRM IF = 30 A IF = 15 A IF = 7.5 A IF = 30 A TVJ = 100C VR = 600 V 6 60 IF = 15 A IF = 7.5 A 40 4 40 20 2 20 0 0 1 2 VF DWLP55-12 V 3 0 100 DWLP55-12 0 0 200 400 DWLP55-12 A/s 1000 -diF/dt 600 A/s 1000 800 -diF/dt B3 Fig. 1 Forward current IF versus VF Fig. 2 Reverse recovery charge Qr versus -diF/dt 280 ns TVJ = 100C VR = 600 V Fig. 3 Peak reverse current IRM versus -diF/dt 120 tfr TVJ = 100C VR = 15 A VFR 2.0 1.2 s tfr 0.8 V VFR 80 1.5 Kf 1.0 IRM trr 240 IF = 30 A IF = 15 A IF = 7.5 A 200 0.5 Qr 40 0.4 DWLP55-12 0.0 0 40 80 TVJ DWLP55-12 160 0 200 400 600 -diF/dt DWLP55-12 0 0 200 400 120 C 160 800 A/s 1000 0.0 600 A/s 1000 800 diF/dt Fig. 4 Dynamic parameters Qr, IRM versus TVJ 1 K/W ZthJC Fig. 5 Recovery time trr versus -diF/dt Fig. 6 Peak forward voltage VFR and tfr versus diF/dt 0.1 0.01 0.0001 VBE100-12 0.001 0.01 0.1 1 t s 10 Fig. 7 Typical transient thermal resistance junction to case NOTE: Fig. 2 to Fig. 6 shows typical values 241 IXYS reserves the right to change limits, test conditions and dimensions. (c) 2002 IXYS All rights reserved 2-2 |
Price & Availability of VBE100-12NO7 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |